03 5 3 Asphalt Mixture Plant Operations Sheet

Product Related Information

  • WARM MIX ASPHALT (WMA) - WBDG

    NEW SUMMARY SHEET . Document: TSPWG Manual 3-250-03.11-3, Warm Mix Asphalt (WMA) Superseding: ETL 11-3, Warm Mix Asphalt (WMA), 8 August 2011 . Zeolite is introduced into the asphalt plant in various ways. On a batch plant, it is manually added directly into the pug mill, or automatically using a weight bucket.

    GET A QUOTE
  • 1. IDENTIFICATION OF THE SUBSTANCE / MIXTURE AND …

    date of issue:10/03/2009 issue: 2 page 1 of 4 ref: sds 31 material safety data sheet cemix asphalt crack filler 1. identification of the substance / mixture and supplier product name: asphalt crack filler recommended use asphalt crack sealing supplier cemix limited

    GET A QUOTE
  • DIVISION 400 - ASPHALT PAVEMENTS

    3 3,000,000 to < 10,000,000 4* > 10,000,000 * A category 2 mixture shall replace a category 1 mixture and a category 4 mixture shall replace a category 5 mixture. The plant discharge temperature for any mixture shall not be more than 315°F whenever PG 64-22 or PG 70-22 binders are used or not more than 325°F whenever PG 76-22 binder is used.

    GET A QUOTE
  • Asphalt batch plant operation and components | Hot mix

    Oct 07, 2017 · The operation of asphalt batch mix plant starts from feeding the aggregates into the feeder bins. The operation ends when hot mix asphalt is discharged into the truck. The first step is to feed unheated-raw aggregates into different bins of the …

    GET A QUOTE
  • SECTION 02330 ASPHALT PAVEMENT PART 1 - GENERAL

    403.138902 "Hot Mix Asphalt, Type 3 Binder Course". 2.02 SHIM COURSE . The mixture of aggregate, filler and bituminous material shall conform to the NYSDOT Standard Specifications, Item 403.138902 "Hot Mix Asphalt, Type 5 Shim Course". 2.03 TOP COURSE . The Bituminous wearing surface shall be of hot-mix, hot-laid, asphaltic concrete,

    GET A QUOTE
  • Asphalt Mix Design - FPA

    Sheet Music; Documents (selected) Snapshots; Class Discussion 1. Uploaded by Mia. (1) found this document useful (1 vote) 167 views. 11 pages. 2.3 Chapter_03(5) 3 Asphalt Mixture Plant Operations Sheet. Uploaded by. mohammed. Issue 6, 2014 Journal of Civil Engineering and Architecture. Uploaded by. Hatem Hadia. Marshall Stability

    GET A QUOTE
  • UNIFIED FACILITIES CRITERIA (UFC) O&M MANUAL: …

    401-2.01 Hot Mix Asphalt Designs. Produce HMA in accordance with the procedures outlined in NYSDOT's Materials Method (MM) 5.16, Superpave Hot Mix Asphalt Mixture Design and Mixture Verification Procedures. Formulate and submit a HMA design to the Regional Materials Engineer (RME) that satisfies all design criteria outlined in MM 5.16.

    GET A QUOTE
  • STANDARD CONSTRUCTION SPECIFICATIONS FOR ASPHALT …

    The Work covered by these Specifications consists of providing all plant, labor, equipment supplies, material, transportation, handling, and storage, and performing all operations necessary to complete the construction of hot mix asphalt concrete pavement consisting of

    GET A QUOTE
  • Hot-Mix Asphalt Plant Operations

    typical batch plant is depicted in Figure 5-1; the major plant components are shown in Figure 5-2. The batch plant tower consists of a hot elevator, a screen deck, hot bins, a weigh hopper, an asphalt cement weigh bucket, and a pugmill. The flow of materials in a batch tower is illustrated in Figure 5-3. The aggregate used in the mix is removed

    GET A QUOTE
  • What is Asphalt - EAPA

    Asphalt is produced in an asphalt plant. This can be a fixed plant or even in a mobile mixing plant. It is possible to produce in an asphalt plant up to 800 tons per hour. The average production temperature of hot mix asphalt is between 150 and 180°C, but nowadays new techniques are available to produce asphalt at lower temperatures. (See below).

    GET A QUOTE
  • SP-120160 (New) SPECIAL PROVISIONS FOR HMA …

    No. 50 5 - 20 No. 200 2 - 6 Asphalt 3.5 - 6.5 3. Use a dense graded mixture design meeting the criteria specified in Table II. Table II Property Required Range Compaction 50 Blows Stability (lbs) 750 Minimum Flow (in.) 0.15 - 0.25 Air Voids (%) 1 - 3% Voids Filled With Asphalt 80 - 90% In-Place Density 95% (Per ASTM D6925) D. Other Materials.

    GET A QUOTE
  • SUPERPAVE ASPHALT CONCRETE

    Sample the asphalt mixture at the plant in accordance with FM 1-T 168. The percent asphalt binder content of the mixture will be determined in accordance with FM 5-563 (ignition oven). The gradation of the extracted mixture will be determined in accordance with FM 1-T 030. All test results will be shown to the nearest 0.01.

    GET A QUOTE
  • Project Special Work Sheet: 403hma 09-13 - co-asphalt.com

    3 REVISION OF SECTION 403 HOT MIX ASPHALT Subsection 403.03 shall include the following: The Contractor shall use an approved anti-stripping additive. The amount of additive used shall be a minimum of 0.5 percent by weight of the asphalt cement. The additive shall be added at the refinery or at the hot plant…

    GET A QUOTE
  • INDIANA DEPARTMENT OF TRANSPORTATION DIVISION OF …

    ITM 583-21 Revised 03/01/2021 . 3 of 16 . 2.4.2 Pertinent contract Special Provisions . 2.4.3 Indiana Certified Asphalt Technician Program Manual . 2.4.4. All applicable ITM, AASHTO, and ASTM Test Methods . 2.4.5. Testing equipment calibrations or verifications

    GET A QUOTE
  • DIVISION 5 – HOT MIX ASPHALT PAVEMENTS AND …

    5-3 . Section 501. Plant-Produced Hot Mix Asphalt . 501.01. Description . This work consists of providing and placing hot mix asphalt (HMA) mix using Superpave mixture design methods. A. Definitions Binder Content. Percent by weight of asphalt cement in the total mixture. Broken Aggregate. Cracked aggregate caused by construction operations.

    GET A QUOTE
  • ASPHALT CONCRETE SECTION 39 SECTION 39 ASPHALT …

    spread sheet over the length of the mixer box in a batch plant, or shall be spread evenly across the mixer box in a continuous mix plant. 39-3.04 Mixing. -The asphalt content of the asphalt mixture may be determined in accordance with ASTM Designation: D 2172 or as specified in Section 39-3.04. "Mixing" of the Caltrans Standard Specifications.

    GET A QUOTE
  • S T A T E - TN.gov

    Sheet 5 of 8 Subsection 307.03 (pg. 246) 5Kefid; Modify Table 307.03-3: B. Recycled Asphalt Pavement for Bituminous Plant Mix Base, Table 307.03-3 Table 307.03-3: Mixtures Using RAP (3) screened or otherwise sized prior to its use. otherwise sized such that the maximum recycled material particle size larger percentages of fractionated RAP s

    GET A QUOTE
  • QUALITY ASSURANCE AND CONSTRUCTION SAFETY …

    2. Concrete Plant Inspection Checklist 3. Asphalt Plant Inspection Checklist 4. Laboratory Audit Checklist 5. Mix Design Approval 6. Mix Design Disapproval 7. Chain of Custody Form 8. Inspector's Daily Log 9. Inspector's Weekly Summary Log 10. Material Release & Shipping Authorization 11.

    GET A QUOTE
  • SECTION 331 - fdotewp1.dot.state.fl.us

    Control all operations in the handling, preparation, and mixing of the asphalt mix so that the percent bitumen and the percents passing the No. 4, No. 10, No. 40 and No. 200 [4.75 mm, 2.00 mm, 425 μm and 75 μm] sieves will meet the approved job mix formula within the tolerance shown in Table 331-6.

    GET A QUOTE
  • KDOT: Pre-Qualified Materials Listing

    Sep 24, 2021 · 19.3 Cold Plastic Pavement Marking Material - Material Code Numbers: 20400000A - White, 20400000B - Yellow, 20401000A - White Symbols - (07/24/17) 19.4 Flexible Delineator Posts And Anchoring Devices - Material Code Group: 211 - (12/20/18)

    GET A QUOTE